This is the complete list of members for ss_nrf24, including all inherited members.
| ceHi() | ss_nrf24 | |
| ceLow() | ss_nrf24 | |
| cePin | ss_nrf24 | |
| configRegister(uint8_t reg, uint8_t value) | ss_nrf24 | |
| csnHi() | ss_nrf24 | |
| csnLow() | ss_nrf24 | |
| csnPin | ss_nrf24 | |
| dataReady() | ss_nrf24 | |
| flushRx() | ss_nrf24 | |
| flushTx() | ss_nrf24 | |
| GetAirData() | ss_nrf24 | |
| getData(uint8_t *data) | ss_nrf24 | |
| getStatus() | ss_nrf24 | |
| init(uint8_t, uint8_t) | ss_nrf24 | |
| isSending() | ss_nrf24 | |
| isSignal(void) | ss_nrf24 | |
| payload | ss_nrf24 | |
| powerDown() | ss_nrf24 | |
| powerUpRx() | ss_nrf24 | |
| powerUpTx() | ss_nrf24 | |
| Print_Internal_Registers() | ss_nrf24 | |
| PTX | ss_nrf24 | |
| readRegister(uint8_t reg, uint8_t *value, uint8_t len) | ss_nrf24 | |
| readRegister(uint8_t reg) | ss_nrf24 | |
| RefData | ss_nrf24 | |
| rxFifoEmpty() | ss_nrf24 | |
| send(uint8_t *value) | ss_nrf24 | |
| SendAirData(uint8_t, uint8_t, char, uint8_t del=30) | ss_nrf24 | |
| SendAirData(uint8_t, uint8_t, int, uint8_t del=30) | ss_nrf24 | |
| SendAirData(uint8_t, uint8_t, float, uint8_t del=30) | ss_nrf24 | |
| SendAirData(uint8_t, uint8_t, unsigned long, uint8_t del=30) | ss_nrf24 | |
| SendData(uint8_t del=30) | ss_nrf24 | |
| Set_Speed_Power(uint8_t) | ss_nrf24 | |
| setChannel(uint8_t) | ss_nrf24 | |
| SetGE(uint8_t, uint8_t) | ss_nrf24 | |
| setPayLoadSize(uint8_t) | ss_nrf24 | |
| setRADDR(uint8_t *adr) | ss_nrf24 | |
| setTADDR(uint8_t *adr) | ss_nrf24 | |
| spiCommand(uint8_t) | ss_nrf24 | |
| spiRead(uint8_t) | ss_nrf24 | |
| spiWrite(uint8_t, uint8_t) | ss_nrf24 | |
| transferSync(uint8_t *dataout, uint8_t *datain, uint8_t len) | ss_nrf24 | |
| transmitSync(uint8_t *dataout, uint8_t len) | ss_nrf24 | |
| txFifoEmpty() | ss_nrf24 | |
| waitAvailableTimeout(uint16_t) | ss_nrf24 | |
| writeRegister(uint8_t reg, uint8_t *value, uint8_t len) | ss_nrf24 | |
1.8.12